โมดูลแปลง USB เป็น TTL โดยใช้ไอซีเบอร์ FT232RL ของ FTDI พร้อมทั้งมีขา DTR ใช้สำหรับการอัพโหลด Arduino โค้ด สามารถเลือกแรงดันได้ทั้ง 3.3v และ 5v และมี pin ต่างๆ ครบ RXD TXD CTR DCD DSR RTS DTR RI GND

USB เป็น TTL UART สำหรับ Upload โปรแกรมเข้าตัวบอร์ด Arduino ทุกรุ่นที่ไม่มี USB รวมไปถึง ใช้กับโปรแกรมตัวโมดูล ESP8266 Wifi
รายละเอียดสินค้า
- 1x FT232RL FT232 USB to TTL 5V or 3.3V Module with DTR Pin for Arduino Upload Sketch
- โมดูลแปลง USB เป็นสัญญาณ TTL (Rx,Tx)
- มีขา DTR ที่ใช้สำหรับการอัพโหลด Arduino เช่น Promini
- ใช้ไอซีเบอร์ FT232RL จาก FTDI
- มีจั๊มเปอร์สำหรับเลือกแรงดันเอาต์พุตที่ออกที่ขา VCC เป็นแบบ 5V หรือ 3.3 V
Description:
- Chip: FT232RL
- Draw out all signal port of FT232RL chip
- RXD / TXD transceiver communication indicator
- USB power supply, can choose 5V or 3.3V, set by jumper
- With over current protection, using 500mA self-restore fuse
- Pin definition: DTR, RXD, TX, VCC, CTS, GND
- Pitch: 2.54mm
- Size: 36 x 18mm (L x W)
- Interface: Mini USB
This adapter supports the following operating systems:
- Windows 2000 (32 bit)
- Windows XP (32 and 64 bit)
- Windows Vista (32 and 64 bit)
- Windows 7 (32 and 64 bit)
- Windows 8 (32 and 64 bit)
- Windows 8.1 (32 and 64 bit)
- Windows 10 (32 and 64 bit)
- Linux 2.6+
- Mac OS X 10.4, 10.5, 10.6, 10.7, 10.8 and 10.9
The drivers can be downloaded from FTDI's website: Download Driver
ตัวอย่างการใช้งาน